Ceramingo SG 1513 All Spice - Artistic High-Fire Glaze (R22534)

SG 1513 All Spice - Ceramingo Artistic High-Fire Glaze

SG 1513 All Spice is an artistic high-fire glaze that brings the warm earth tones of spices and deep reactive transitions to pottery surfaces. Dark blue and navy flows developing over a mustard-brown base give the surface rich visual depth and a powerful character. Supplied in a ready-to-use liquid form, the product can create different color distributions on every piece depending on application thickness, the clay body used, and firing conditions.

Technical Data and Application

Color Pairing Suggestions

The warm, dynamic, and multi-layered character of All Spice glaze can be paired with the following colors:

Application Notes

• Product preparation: Mix the product thoroughly before application to distribute the pigments and reactive components evenly throughout the liquid. Stirring again at regular intervals during application is recommended.
• Brush application: The product can be applied directly over a clean and dry bisque surface. Apply in even coats and allow each coat to dry completely.
• Application thickness: As the number of coats and glaze thickness increase, the mustard-brown base and dark blue flows may become more pronounced. Reactive transitions may appear weaker when applied too thinly, while excessively thick application may increase glaze movement.
• Pouring and dipping: For these methods, the consistency can be adjusted by adding approximately 5-10% water. Water should be added gradually while preserving the glaze coverage.
• Reactive color development: The distribution of the dark blue and navy flows may vary depending on the peak temperature, hold time, application thickness, and cooling rate.
• Clay body effect: The warm base and blue transitions may appear more distinct on white and light-colored high-fire clay bodies, while dark or grogged clay bodies may produce a deeper, more mineral-like surface.
• Form and texture: The glaze may collect at different thicknesses in recessed and raised areas. This can enhance the tonal transitions and details of the form.
• Vertical forms: Because the reactive glaze may move during firing, a thinner and more controlled application is recommended near the base. Keep the glaze away from areas where it could come into contact with the kiln shelf.
• Storage: Keep the product in its airtight, sealed packaging, away from direct sunlight, and at room temperature.
• Safety: Appropriate protective equipment should be used during application, and the product should be stored out of reach of children.