Seramiksir Salmon Engobe AST 176 - 175 g (R24702)

Seramiksir Salmon Engobe AST 176 - 175 g

Seramiksir AST 176 Salmon is a ready-to-use liquid engobe developed to give clay surfaces warm, soft, and balanced salmon tones. Suitable for application over white and red clay bodies, it alters the surface color while creating a natural matte, velvety appearance. It can be applied to leather-hard forms by brush or dipping and used both as a primary decorative color and as a base for subsequent glazing.

Technical Data and Application

Color Pairing Suggestions

The warm, soft character of AST 176 Salmon can be paired with the following colors:

Application and Storage Notes

• Surface Preparation: Apply the engobe to a clean, dust-free, leather-hard clay surface. Excessively dry or wet surfaces may cause adhesion and drying problems.
• Brush Application: Apply the engobe in thin, even coats to achieve a uniform, opaque surface. Allow the surface to lose moisture between coats and apply each coat in a different direction.
• Dipping Application: Adjust the product consistency carefully to achieve a smoother, continuous surface. Keep the piece immersed for an even amount of time to prevent buildup on the surface.
• Drying and Firing: After application, allow the piece to dry completely and gradually. Then perform a bisque firing using a schedule suitable for the clay body.
• Glazing: If a glossy or protective surface is desired after bisque firing, a compatible transparent or colored glaze can be applied over the engobe.
• Preparation: Mix the product thoroughly before use to distribute the pigments evenly. If settling occurs during storage, strain the product when necessary before application.
• Storage: Store the product tightly sealed at room temperature, protected from freezing and direct sunlight.