RS2A4.000 KILN WITH TROLLEY (R6638)

Technical Specifications
Volume : 4000 LT
Interior dimensions : 110*330*110 cm. (Recommended). Can be in different sizes.
Power 160 - 180 KW. (It will be determined according to the work done)
Door: opens to the right or left. (Optional: Pneumatic or Hydraulic Top Opening)
Oven type: Chamber type, two trolleys. (Front back door or single door system)
Two trolley system with manual movement on the rail, in and out of the oven.
Interior and exterior surfaces are electrostatic powder coated (baked at 200ºC), completely resistant to decay.
Oven floor level is at a suitable height from the ground for ease of operation.
The control panel on the oven and oven electrical connections are protected.
40 mm ventilation gap on 4 surfaces. (provides easy heating and cooling of the oven, easy removal of gas and water vapor and long life of the metal parts)
With ventilation flap at the top and flap at the bottom (in proportion to the internal volume)

Kontor RF800 Digital Programmer
It is a digital with 5 programs and 15 sets in each program. It also shows date, time, program, step, set temperature, exit time, current temperature and remaining time.

Accessories-Optional
European shelf made of 400x500x15 mm cordierite material with 1200ºC resistance to be used in the oven.
5cm long, round, 1200ºC resistant, interlocking shelf leg (support) to be used in the oven.

Optional Features
Geared trolley system
2. Car and rail system

Work to be done by the Customer

The place where the oven will be placed and the width required for installation.

The cables, fuses etc. required for the electrical line are notified by our company, the place where the oven will be installed and the electrical connections are prepared up to the oven and the panel before the oven delivery.

The panel will be brought ready by us together with the oven.

Installation takes max. 1 day including trial burning.