RS2A2.000 KILN WITH TROLLEY
RS2A2.000 KILN WITH TROLLEY
RS2A2.000 KILN WITH TROLLEY
RS2A2.000 KILN WITH TROLLEY
RS2A2.000 KILN WITH TROLLEY
RS2A2.000 KILN WITH TROLLEY

RS2A2.000 Kiln With Trolley (R6634)

Brand : REFSAN
Price : 0,00€
FİYAT SORUNUZ

 

RS2A2.000 KILN WITH TROLLEY

 

Inner dimensions: 170x110x110cm - 2000 dm3 available internal volume.

Weight: ~1500kg (excluding rail system)

Power: 70 - 80 KW (Depends on industry and product)

Max. The temperature is 1300ºC. (it can be baked up to 1300 degrees)

Voltage: 380V

Door: opens to the right or left.

Furnace type: Cabin type, two-car. (Front rear door or single door system)

Two-car system with manual movement on the rail, which can enter and exit the oven.

Insulation contents: 1430°C 26 European JM resistant Thermal Ceramics ' European brick (230x114x64mm 800kg/m3 - vertical layout), 1260°C resistant to board plate (1200x1000x50mm 300kg/m3 - vertical layout). X800 Board with 800°C resistance (vertical placement).

Inner and exterior surfaces are completely painted with electrostatic powder with resistance to decay (baked at 200ºC).

In order to ensure uniform heat distribution, KANTHAL A1 resistor with a resistance of 1400ºC with equal even spacing was used.

The furnace floor level is at the appropriate height from the floor for ease of operation.

Electrical control elements Telemecanique.

The control panel and furnace electrical connections on the furnace  are protected.

4 on the surface, 40mm ventilation gap. (it ensures that the furnace heats up and cools down comfortably, the gas and water vapor that comes out is easily disposed of, and the metal assembly has a long service life)

With a ventilation lid on top and a flap on the bottom (in sizes proportional to the internal volume)

heated from 5 directions. (ensures that all products are exposed to the same temperature with uniform heat dissipation)

Control: RF800 programator

it is a digital that can be entered in 5 programs and 15 sets in each program.

It also shows the date, time, program, step, set temperature, time to exit, current temperature and remaining time.

Automatic start at the next date and time

Temperature measurement: Single-point with K-Type NiCr-Ni 25-1200ºC Nickel-Chromium thermocouple.

The furnace cooling system is free cooling.

Automatic power off system when the door is opened

suitable for a shelf of 40x50 cm.
2 Years Warranty + 10 Years Service Warranty

Certified for compliance with CE European Standards

ACCESSORIES-OPTIONAL

A European rack made of 400x500x15 mm Cordierite material to be used in the furnace and with a resistance of 1200ºC.

5cm tall, round, 1200ºC strength, interlocking rack foot (headstock) to be used in the oven.

OPTIONAL FEATURES

 

NOTE: The gearmotor car system is absolutely unusable.

 

Kiln Type
KILN WITH TROLLEY
Volume
2000 LT. (2 m3)
Maximum Temperature
1200°C 1300°C
Heating Sides
5 SIDES ( RIGHT+LEFT+FLOOR+BACK+DOOR)
Control Unit
DIGITAL PROGRAMMER (5 PROGRAM AND 15 STEPS FOR EACH PROGRAM)
Automatically Exhaust Control
OK
Automatically Continuation After Energy Interruptions
OK
Operation Reports
OK / Last 8 Operation
Automatically Start-up on Any Desired Time
OK
Thermocouple
S TYPE ( 0 - 1300 °C) K TYPE ( 0 - 1200 °C)
Themocouple Count
3 (Floor+Middle+Top)
Panel
DIGITAL PANEL
Power
400V
Connected Load kW
75KW
Heating Type
ELECTRIC RESISTANCES KANTHAL A1
Contact Type
SSR
Protection Switch
AVAILABLE
Paint of Kiln
Electrostatic Powder Dye
Insulation Type
EUROPEAN ALUMINA BRICKS RESISTANT TO 1430°C
CE Certification
CERTIFIED
Product Origin
TÜRKİYE
Warranty
2 YEARS
Service Support
10 YEARS
Kiln Shelves (Optional)
40*50 cm.
Opsiyonel
Redüktörlü Araba Sistemi ( Düğme ile Girip Çıkma)