Nolina Vase Ceramic Bisque (R23744)

Nolina Vase Ceramic Bisque

Nolina Vase Ceramic Bisque is an unglazed ceramic bisque product designed for painting, glazing, and personalized decoration projects, featuring a curved body and flowing silhouette.

Its broad, curved surface provides a distinctive application area for underglaze paints, ceramic glazes, ceramic paints, abstract compositions, linear patterns, botanical motifs, and color transitions. The small and large size options can be displayed together to create a coordinated decorative series.

Technical Specifications and Dimensions

Painting and Usage Options

• Can be colored with underglaze paints, ceramic paints, and ceramic glazes.
• Abstract compositions, pastel color transitions, linear patterns, and botanical motifs can be applied to the surface.
• Continuous borders and uninterrupted compositions can be created along the curved body.
• The flowing form can be emphasized by highlighting the inner and outer curves with different colors.
• The small and large sizes can be decorated using the same color palette to create a coordinated decorative series.
• Different surface finishes can be created using solid-color, matte, glossy, metallic, speckled, reactive, or effect glazes.
• Once properly glazed, it can be used with fresh flowers, dried flowers, single stems, and decorative branches.
• For projects that will not be kiln-fired, acrylic painting, dry-brush, antiquing, patina, and stencil techniques can be applied.

Application and Firing Notes

• Before painting, remove surface dust with a clean, dry brush.
• The firing temperature should be determined according to the technical specifications of the paint and glaze used.
• Care should be taken to prevent excessive glaze from accumulating around the curved transitions, opening, inner surface, and base.
• Glaze should be applied in an even thickness to ensure consistent color and texture across the flowing body form.
• Excessive glaze application may cause pooling around the curved areas and alter the surface appearance.
• The base must be left unglazed when placing the product in the kiln.
• For products intended to hold water, the inner surface must be glazed completely and without gaps.
• The small and large products should be positioned inside the kiln to prevent them from touching each other or other pieces.
• After firing, check the surfaces for cracks, pinholes, sharp edges, or unglazed areas.

Display and Handling Notes

• The product should be displayed on a flat, stable surface capable of supporting its weight.
• When carrying the product, do not hold it by the opening or thin edges; support it from the body and base.
• Long or heavy flowers may alter the product’s center of gravity, so arrangements should be prepared carefully to maintain balance.
• When the small and large sizes are displayed side by side, they should be positioned so that they do not touch each other.
• The product should not be displayed on inclined or vibrating surfaces or near edges.
• The curved edges should be protected from impacts and collisions.

Handcraftsmanship and Product Variations

Due to the ceramic production process, slight variations in dimensions, weight, surface texture, color tone, body curvature, and opening shape may occur between products. These differences do not affect use and are a natural result of the production process.