Mask V2 Ceramic Bisque
Mask V2 Ceramic Bisque is an unglazed ceramic bisque product featuring defined facial features and a three-dimensional form, designed for artistic painting, glazing, and personalized decoration projects.
The recessed and raised details around the eyes, nose, lips, and facial contours provide distinct application areas for shading, color transitions, texture effects, and character designs. Once completed, it can be used as wall décor, an exhibition piece, or part of a themed collection.
IMPORTANT NOTE: The product is supplied as fired but unglazed ceramic bisque. To achieve a glazed and easy-to-clean surface, it should be decorated with suitable ceramic paints and glazes, then fired again at the temperature recommended for the glaze used.
Technical Specifications and Dimensions
Product Dimensions
- Dimensions: 19 × 12.5 × 6.5 cm
- Average weight: 230 g (±2%)
Product Information
- Product type: Decorative mask ceramic bisque
- Form: Three-dimensional human face
- Surface: Unglazed and porous
- Bisque firing: 1050°C
- Uses: Painting, glazing, wall decoration, and exhibition projects
Painting and Usage Options
- Can be colored with underglaze paints, ceramic paints, and ceramic glazes.
- Shading, tonal variations, contrasting colors, and smooth transitions can be applied to the facial features.
- Can be personalized with theatrical, ethnic pattern, abstract art, portrait, and fantasy character themes.
- The three-dimensional appearance can be enhanced by applying lighter tones to raised areas and darker tones to recessed areas of the face.
- Different surface finishes can be created using matte, glossy, metallic, speckled, or effect glazes.
- For projects that will not be kiln-fired, acrylic paint, patina, dry-brush, and texture techniques can be applied.
- Can be used for wall decoration, tabletop display, and themed mask collections.
- Suitable for ceramic workshops and handmade gift projects.
DECORATIVE USE WARNING: Products decorated with acrylic paint or decorative varnish should only be displayed in dry indoor areas and must not be exposed to water, high humidity, or direct outdoor conditions.
Application and Firing Notes
- Before painting, remove surface dust with a clean, dry brush.
- The firing temperature should be determined according to the technical specifications of the paint and glaze used.
- Care should be taken to prevent excessive paint or glaze from accumulating in the recessed areas around the eyes, nose, lips, and facial contours.
- Glaze should be applied in a thin and even layer to preserve the three-dimensional details.
- Areas that come into contact with the kiln shelf must be left unglazed when placing the product in the kiln.
- After firing, check the surface for cracks, glaze runs, sharp edges, or uncoated areas.
DISPLAY WARNING: This product is not designed to be worn on the face or used as a protective mask. If it is mounted on a wall or displayed on a stand, a secure fixing method suitable for the product’s weight and form must be used.
Handcraftsmanship and Product Variations
Due to the ceramic production process, slight variations in dimensions, weight, surface texture, color tone, and facial details may occur between products. These differences do not affect use and are a natural result of the production process.
TEST RECOMMENDATION: A small test application is recommended before use to check the compatibility of the paint and glaze with the product, the result they produce on the three-dimensional surface, and their firing behavior.