Lantern Vase Ceramic Bisque
Lantern Vase Ceramic Bisque is a decorative ceramic product that interprets the traditional lantern form with contemporary lines, featuring a long cylindrical body and a round upper section.
Thanks to its 30 cm height and voluminous structure, it creates a strong visual impact on its own. Its unglazed and porous surface is suitable for underglaze paint, ceramic glaze, tile paint, acrylic paint, and different surface applications.
IMPORTANT NOTE: The product is delivered as fired but unglazed ceramic bisque. In order to hold water and gain an easily cleanable surface, its inner and outer surfaces must be covered with suitable ceramic glazes and refired at the recommended temperature of the products used.
Technical Specifications and Dimensions
Product Dimensions
- Width: 14 cm
- Depth: 14 cm
- Height: 30 cm
- Mouth diameter: 7 cm
Product Information
- Product type: Decorative vase ceramic bisque
- Form: Lantern form with a long body and round upper section
- Surface: Unglazed and porous
- Bisque firing: Approximately 1050°C
- Usage: Painting, glazing, vase, and decorative object
Painting and Usage Options
- Can be colored with underglaze paints, tile paints, and ceramic glazes.
- Botanical motifs, geometric patterns, borders, and free brushwork can be applied to its wide surface.
- The cylindrical body and round upper section can be highlighted with different colors and glazes.
- Can be used with dried flowers, artificial flowers, pampas grass, and decorative branches.
- Can be personalized with acrylic and hobby paints for works that will not be fired.
- Can be utilized for ceramic workshops, showcase arrangements, and handmade gift projects.
DECORATIVE USE WARNING: Products applied with acrylic paint or decorative varnish should only be used for decorative purposes, should not be filled with water, and should not be washed under water.
Application and Firing Notes
- Before painting, dust on the surface should be removed with a clean and dry brush.
- The firing temperature should be determined according to the technical specifications of the paint and glaze used.
- Care should be taken to prevent excessive glaze accumulation in the mouth section, inner base, and body transitions.
- When placing in the kiln, no glaze should be left on the base section.
- For products to be used with water, the inner surface must be completely glazed, and a leak test should be performed after firing.
WATER USE WARNING: The fact that the product is glazed does not alone guarantee that it will not leak water. The correct glaze and firing program must be applied, and the product must be tested with water before use.
Craftsmanship and Product Variations
Due to the ceramic production process, minor differences in dimensions, surface texture, and form may be seen between products. These differences, which do not affect usage, stem from the natural structure of the product.
TEST RECOMMENDATION: It is recommended to perform a small test before application to see the compatibility of the paint and glaze to be used with the product, the result it will create on the wide surface, and its firing behavior.