```
Double Pomegranate Plaster Mold Set
Dual-cavity plaster casting molds designed for serial production of decorative
and artistic ceramic objects in the form of pomegranates. Two different size
options are available: small and medium. Each mold features a 3-piece structure
suitable for producing 2 pomegranate figures in a single casting operation.
The molds can be used with earthenware, ceramic, stoneware, and porcelain casting slips.
| Model |
Plaster Mold Dimensions |
Finished Product Height |
Mold Weight |
| Small Pomegranate |
29 × 15 × 15 cm |
7 cm |
7 kg (±%10) |
| Medium Pomegranate |
32 × 16 × 15 cm |
10 cm |
7,5 kg (±%10) |
Size Options
2 Different Sizes
Finished Product Heights
7 cm / 10 cm
Number of Mold Pieces
3 Pieces
Production Capacity
2 Pieces per Casting
Production Type
Double Battery Casting
Dimension Information:
The finished product heights are measured from the ceramic bisque pieces.
Final product dimensions may vary depending on the shrinkage rate of the clay
and the firing temperature. Mold weights may vary by ±%10 depending
on moisture content.
Dual Production:
Each mold contains two separate pomegranate product cavities.
This allows 2 pomegranate figures to be produced
simultaneously in a single casting operation.
Compatible Clays
The molds can be used with earthenware, ceramic, stoneware, and porcelain casting slips.
The wall thickness and casting time may vary depending on the characteristics of the clay used.
A fuller wall thickness is generally preferred with ceramic and earthenware casting slips.
Stoneware and porcelain casting slips, when used with suitable formulations and casting conditions,
are suitable for producing thinner forms. With suitable porcelain bodies in particular,
very thin castings with light-transmitting translucency can be achieved.
Warning:
Not suitable for stone powder, plaster, concrete, resin, or similar
non-ceramic casting materials.
Usage and Drying
- The casting slip should be poured into both product cavities of the mold in a controlled manner.
- It is recommended to mix the casting slip thoroughly until homogeneous before casting.
- The casting slip should be distributed evenly inside the mold to ensure that the body and crown details of the pomegranate form are shaped correctly.
- 2 ceramic bisque pieces can be produced in a single casting operation.
- Depending on ventilation and drying conditions, an average of 2–4 castings can be made per day.
- The mold should be allowed to dry sufficiently between castings.
Wet Mold Warning:
Depending on production intensity, the mold may occasionally be shipped
while still damp or wet. In this case, it should be left to
air-dry naturally for 1–2 days in a well-ventilated area
before use.
Minor deformation may occur on the outer surface, edges, or corners
of the mold during transportation. The mold can still be used as long as
there is no damage to the internal casting surface that would affect
the finished product or interfere with the casting process.
Mold Lifespan:
Approximately 100 castings on average. This may vary depending on the clay used,
casting frequency, drying conditions, and method of use.
```