Asymmetric Vase M2 Ceramic Bisque
Asymmetric Vase M2 Ceramic Bisque is a sculptural ceramic product that stands out with its organic body lines and the void detail in its center.
Thanks to its wide and curved surface, it can be used alone as a decorative object. Its unglazed and porous structure is suitable for underglaze paint, ceramic glaze, tile paint, acrylic paint, and different surface applications.
IMPORTANT NOTE: The product is delivered as fired but unglazed ceramic bisque. In order to hold water and gain an easily cleanable surface, its inner and outer surfaces must be covered with suitable ceramic glazes and refired at the recommended temperature of the products used.
Technical Specifications and Dimensions
Product Dimensions
- Width: 25 cm
- Depth: 12.5 cm
- Height: 23.5 cm
- Weight: 710 g (±2%)
Product Information
- Product type: Decorative vase ceramic bisque
- Form: Wide-bodied, asymmetric, and with a center void
- Surface: Unglazed and porous
- Bisque firing: 1050°C
- Usage: Painting, glazing, vase, and decorative object
Painting and Usage Options
- Can be colored with underglaze paints, tile paints, and ceramic glazes.
- Can be completed with single color, speckled, reactive, or gradient glaze applications.
- Asymmetric body transitions and the center void can be highlighted with different colors.
- Can be used with dried flowers, artificial flowers, or decorative branches.
- Can be personalized with acrylic and hobby paints for works that will not be fired.
- Can be utilized for ceramic workshops and handmade gift projects.
DECORATIVE USE WARNING: Products applied with acrylic paint or decorative varnish should only be used for decorative purposes, should not be filled with water, and should not be washed under water.
Application and Firing Notes
- Before painting, dust on the surface should be removed with a clean and dry brush.
- The firing temperature should be determined according to the technical specifications of the paint and glaze used.
- Care should be taken to prevent excessive glaze accumulation in the center void, curved transitions, and inner surface.
- When placing in the kiln, no glaze should be left on the base section.
- For products to be used with water, the inner surface must be completely glazed, and a leak test should be performed after firing.
WATER USE WARNING: The fact that the product is glazed does not alone guarantee that it will not leak water. The correct glaze and firing program must be applied, and the product must be tested with water before use.
Craftsmanship and Product Variations
Due to the ceramic production process, minor differences in dimensions, weight, surface texture, and form may be seen between products. These differences, which do not affect usage, stem from the natural structure of the product.
TEST RECOMMENDATION: It is recommended to perform a small test before application to see the compatibility of the paint and glaze to be used with the product, the result it will create on the surface, and its firing behavior.