756 Ceramic Casting Slip Liquid (R21035)

It is ready for use; however, you should stir it again, measure its specific gravity (Baumé), and filter it before use. The recommended Baumé range is between 50 and 60.
The firing temperature is 1040–1060°C.

Important points to consider when using ready-to-use casting slip:
The product may arrive with sediment at the bottom.
You should mix the product thoroughly using a mixer.
A creamy layer on top of the slip indicates incomplete mixing. Mix for at least 10 minutes.
Once you're sure the slip is well mixed, be sure to measure it with a Baumé meter.
The composition of the slip may vary depending on weather conditions.
When taking the slip from the container, it should be filtered using a sieve or mesh.
After these steps, it is recommended to use the slip immediately after mixing, without waiting for it to settle again.
 

NOTE: Ensure the mold is dry and the slip is bubble-free when pouring it into the mold.

NOTE: Pouring the slip slowly into the mold helps prevent bubbles and ensures it reaches even the smallest cavities.

NOTE: The prepared slip should have a density of 1680–1690 g/L.

The product is available in 5 kg, 25 kg, and 50 kg packaging. However, due to difficulties in shipping and handling and limitations under European standards, the 50 kg version is only available at our physical retail points. This decision has been made to ensure the product is transported safely and used optimally.

5 KG White Plastic Container with Handle

25 and 50 KG Blue Containers

If you would like more information or wish to purchase the 50 kg version of this product, please contact your nearest sales point or reach out to our customer service team.