Seramiksir S 2077 Amor - Artistic Low-Fire Glaze (R26017)

S 2077 Amor - Artistic Low-Fire Glaze

S 2077 Amor is an artistic low-fire glaze that develops white mineral particles over salmon and fuchsia tones. Thin applications highlight lighter, pastel salmon tones, while thicker areas may intensify into vibrant fuchsia and pink transitions. Its glossy and semi-transparent character creates a dynamic and layered appearance across the surface.

Technical Data and Application

Color Pairing Suggestions

The salmon, fuchsia, and white-speckled character of S 2077 Amor can be paired with the following colors:

Application Notes

• Thin application: Light and pastel salmon tones may become more prominent.
• Thick application: The color may become more saturated, developing vibrant fuchsia and deep pink transitions.
• Particle concentration: The visibility of the white mineral particles may become more pronounced as application thickness increases.
• Mixing: The product should be stirred regularly before and during application to prevent the particles from settling and to ensure even distribution across the surface.
• Coat control: Each coat should be allowed to dry sufficiently before the next application, and excessive glaze buildup on the surface should be avoided.
• Consistency adjustment: For spraying or dipping applications, water should be added gradually and in a controlled manner to avoid over-thinning the product.
• Clay body selection: Due to its semi-transparent character, the color of the clay body may affect the final appearance of the salmon and fuchsia tones.
• Combination: Before combining with other glazes, chemical compatibility, color transitions, and flow behavior should be tested on a test tile.
• Care: Hand washing is recommended to preserve the glossy finish and artistic particle effect.
• Safety: Appropriate personal protective equipment should be used during application, and the work area should be adequately ventilated.
• Storage: Keep the container tightly closed and away from direct sunlight. If settling, drying, or thickening occurs, mix thoroughly before application and strain if necessary.