Seramiksir Gobi 175 Gr SP 1488
Seramiksir Gobi 175 Gr SP 1488
Seramiksir Gobi 175 Gr SP 1488

SP 1488 Gobi - Artistic High-Fire Glaze

SP 1488 Gobi is an artistic high-fire glaze that creates cream, sand, amber, and light gray transitions. Due to its fluid nature, color intensity may increase in recessed, curved, and horizontal areas of the form. After firing, it produces a glossy, dynamic surface with natural tonal variations.

Food Safe: This glaze is suitable for surfaces that come into contact with food when proper application and firing conditions are followed.
Flow Warning: This product is a fluid artistic glaze. On vertical forms, an unglazed safety margin should be left near the base to prevent the glaze from reaching the kiln shelf during firing.

Technical Data and Application

Thermal Properties

  • Firing Temperature: 1200°C - 1220°C
  • Temperature Range: High-Fire
  • Firing Type: Artistic High-Fire

Product Information

  • Packaging: 175 g
  • Form: Ready-to-use thick liquid
  • Finish: Glossy
  • Effect: Cream, sand, amber, and light gray transitions

Application Information

  • Method: Brush, spray, dipping, or pouring
  • Brush Application: Can be applied directly after mixing
  • Dilution: Controlled addition of 5-10% water for spray, dipping, and pouring applications
  • Flow: High

Color Pairing Suggestions

SP 1488 Gobi's natural cream and sand tones can be paired with the following colors:

Cream Sand
Amber
Glacier Gray
Off-White
Earth Brown

Application Notes

  • Mixing: The product should be mixed thoroughly before and regularly during application to ensure an even distribution of color-producing components.
  • Layer application: Apply the glaze in even layers and carefully control the thickness throughout the form.
  • Thickness effect: Thinner areas may show lighter cream tones, while thicker areas can develop more pronounced sand, amber, and gray transitions.
  • Flow control: On vertical forms, consider that the glaze may move downward during firing and leave areas near the base unglazed.
  • Kiln shelf protection: To protect against possible glaze runs, fire the piece on a catch plate or suitable kiln shelf separator.
  • Dilution: For spray, dipping, or pouring applications, add water in small amounts and avoid over-diluting the product.
  • Form effect: The glaze may pool in recessed, curved, and horizontal areas, creating more intense amber and sand tones.
  • Clay body selection: Cream and amber transitions appear more pronounced on white and light-colored high-fire clay bodies, while results may vary on darker bodies.
  • Glaze combinations: Before combining with other glazes, test chemical compatibility, color transitions, and flow behavior on a test tile.
  • Care: Hand washing is recommended to preserve the gloss and artistic surface character.
  • Safety: Use appropriate personal protective equipment during application and ensure adequate ventilation in the working area.
  • Storage: Keep the container tightly closed at room temperature and away from direct sunlight.
Important Recommendation: The intensity of the cream and sand tones, distribution of the amber and gray transitions, glaze flow, and surface gloss may vary depending on application thickness, clay body, peak temperature, kiln atmosphere, and cooling schedule. Preparing both vertical and horizontal test tiles before the main application is recommended.
Brand
Seramiksır
Firing Temperature
1200 ~ 1220°C (5 - 6 Cone)
Transparency
Opaque
Food Safety
Safe
Effect
Artistic Colors
Substrate Compatibility
Porcelain
Using Type
Dipping Brush Airbrush
Physical Condition
Liquid
Packaging
118 ml. 335 ml.
cultureSettings.RegionId: 0 cultureSettings.LanguageCode: EN