Seramiksir S 1030 Garnet - Artistic Low-Fire Glaze (R26007)

S 1030 Garnet - Artistic Low-Fire Glaze

S 1030 Garnet is an artistic low-fire glaze featuring lilac mineral speckles over dusty rose and deep cherry tones. In thin applications, lighter and more pastel shades may appear, while thicker areas can develop richer deep cherry tones and more pronounced variegated transitions. Its glossy and semi-transparent character creates a layered and reactive surface appearance.

Technical Data and Application

Color Pairing Suggestions

The dusty rose, deep cherry, and lilac-speckled character of S 1030 Garnet can be paired with the following colors:

Application Notes

• Thin application: Lighter and more pastel dusty rose tones may become more prominent.
• Thick application: The color may intensify toward deep cherry tones, with more pronounced variegated transitions.
• Speckle density: The visibility of the lilac mineral speckles may increase as the application becomes thicker.
• Mixing: Stir the product thoroughly before and during application to prevent the particles from settling and to ensure even distribution across the surface.
• Coat control: Allow each coat to dry sufficiently before applying the next coat and avoid excessive glaze buildup on the surface.
• Consistency adjustment: For spraying or dipping applications, add water gradually and in a controlled manner. Avoid excessive dilution.
• Clay body selection: Due to its semi-transparent character, the color of the clay body may affect the final appearance of the red and deep cherry tones.
• Glaze combinations: Before combining with other glazes, test chemical compatibility, color interaction, and flow behavior on a test tile.
• Care: Hand washing is recommended to preserve the glossy finish and artistic speckled effect.
• Safety: Appropriate personal protective equipment should be used during application, and the work area should be adequately ventilated.
• Storage: Keep the container tightly closed and away from direct sunlight. If settling, drying, or thickening occurs, mix thoroughly before application and strain if necessary.